Note: This is a catalog of the Wrenching News Auction of antique wrenches from the collections of Lee Fisher, Earl Drehmel, Charles Burkey and a few other Missouri Valley Wrench Club Members that was held in York, Nebraska on April 4-5, 2014. Printed catalogs and Lists of Prices Realized are available from Don 'Bus' Haury - 7913 SW 24th, Halstead, KS, 67056 316-284-7345 - Email. Visit the for a list of other wrench auction catalogs and information on future wrench auctions and other events, information on collecting antique wrenches, and a discussion board. Visit the for a large selection of wrenches and related items for sale. Both starting collectors and advanced will find something they need there. Visit For books on collecting wrenches and other tools plus all our past wrench auction catalogs and price lists.

Contact us if you want to dispose of your old wrenches (one or a collection). We have either managed or assisted with the sale of most of the major wrench collection that have been sold in the last several years.

I am also available to advise and assist auctioneers who have old wrenches to auction. CATALOG OF WRENCHES for the 2014 York Spring ANTIQUE WRENCH AUCTION Wrenches from the collections of Lee Fisher, Earl Drehmel, Charles Burkey and a few other Missouri Valley Wrench Club Members Friday April 4, and Saturday April 5, 2014 AUCTION STARTS AT 12:30 P.M.

FRIDAY (approximately 1/2 hour after Wrench Club Meet ends) AND AT 8:30 A.M. SATURDAY AT THE CITY AUDITORIUM, 6TH & NEBRASKA AVENUE YORK, NEBRASKA. This year's auction consists of wrenches and other antiques form several Missouri Valley Wrench Club members. The bulk of the farm wrenches were mailed in forty-one Priority Mail Flat Rate Boxes from West Virginia by Lee Fisher.

Item 101 - 1148. CHALLENGE, DIAMOND, Paper Cutter, Grey, 26.5, Good Condition, Heavy Duty Cutter, Manual Clamp, $1,800. CHALLENGE, 265 HBE, Paper Cutter, Yellow, 26.5', Excellent Condition, Nice Compact And Heavy-duty Cutter, With Side Tables And Push-button Cut, Power Clamp And Cut, SOLD, More Info. Today's print market places great demands on your business. Investments in cutting-edge wide format, inkjet, and digital print engines ensure you meet your customer's needs. Why are you wasting valuable production time using that old paper cutter? Step up to a Titan 265 TC! The Titan 265 TC continues delivering the.

His collection of farm wrenches is exceptionally strong in International Harvester tools with several that few show on the IHC Owner's List. Wrenches and tools of all kinds came from Earl Drehmel of Fall Creek.

Wisconsin as he continues to disperse of his collection a process that started at the Fall 2013 Meeting and Auction. Robert Burkey of Iuka, Kansas added a few hundred more as he continues to disperse his collection. Choice individual wrenches were obtained from Richard Lawton, Don Ervin, and Herb Page.

Some of the 'Top Drawer' wrenches in the auction include: A Coes Double Screw adjustable nut wrench and several other early Coes monkey wrenches, a Kibler patent Oct 30, 1900 adjustable wrench, a John Morris patented pipe wrench, a Columbian Wrench patented Sept. 13, 1892, Mechanics Tool Co., Rockford, Ill. Patented Jan. 7, 1913, etc., etc.

There is a nice selection of four inch Crescent types, bicycle and automobile wrenches. A few of the rare farm wrench names are: Tom Cat, Brown-Dallas buggy wrench, M B M Mfg. Red-E, Brinly Plows, a C338 marked P. Mast and many more.

There is probably the best selection of silo type wrenches we have ever had to offer. With over 2000 items there should be something for both advanced and beginning collectors of all kinds of antique wrenches.

Auction Manager: Don 'Bus' Haury 7913 SW 24th - Halstead, KS, 67056 316-284-7345 or 316-283-5876 Auction Catalog and Prices Realized List: A printed catalog and post auction price realized list will be available. See contact information for Don Haury above. To view individual or group pictures click on the PiC or PiCs logos in the listings. To view all pictures on one page If you don't have a fast connection you will probably have to refresh the page a few times) To view all pictures as a slide show on Photobucket To view all pictures on Photobucket To see patent information click on the PAT. Logo in the listings.

Patent information is from the or if the patent is not listed on DATAMP. For abbreviations and book references used in our auction catalogs: Other info: * Measurements are usually rounded off to the nearest 1/4'. * The markings on the wrenches are in all capital letters. * a / separates markings on one side of the wrench from the other side.

* If a wrench is misnumbered in a photo the description number will prevail. * All farm type wrenches are cast malleable iron unless noted otherwise. * To search for a particular wrench or company (for example IHC, Deere, Coes, adjust etc,) use the find on this page in the edit menu. I have tried to list the company or companies associated with each wrench. For more information on the Wrench Auction and the Missouri Valley Wrench Club Meet see This auction catalog was created and is hosted by Don 'Bus' Haury. Any questions or comments please email or phone 316-284-7345. ***************************** List of Wrenches The Wrenching News 2014 Spring Antique Wrench Auction April 4-5, 2014 - York, Nebraska.

Adjustable Wrenches - First Group (lots 001 thru 101) 0001. CRESSEY (weak markings) - - 14' wooden handled screw adjust with coarse threaded shaft and spring loaded lower jaw. Patented by Isaiah Cressey of Gloucester, Mass. Rare early wrench Good+ with a tight handle crack. (S595, C111) 0002.

CRESSEY - PAT MAR, 1876 (weak markings) - - 24' all metal variant of the Cressey pipe wrench (see lot 0001 above). Patented by Isaiah Cressey of Gloucester, Mass. Extra large rare early wrench. Good+ with light pitting. (S595, C111) 0003.

THE HAMMOND MFG. BOSTON, MASS USA / PATENTED APRIL 3. 1900 - - 12.5' quick adjust rack type wrench with a lever that releases the upper jaw. Patent was issued to Edward Wright of Worcester, Mass. BONNEY VISE & TOOL WKS MAR 3, 1908 PHILA (weak markings, not all readable) - - 15.75'.Wood handled threaded shaft type combination nut and pipe wrench with pipe cutter attachment.

Advertised as 'The Masterpiece'. Patented March 3, 1903 by Charles S. Bonney of Portsmouth, Ohio. Scarce large size. Good with some pitting, no patina.

GOODELL PRATT COMPANY - TOOL SMITHS - GREENFIELD, MASS - USA - - 9.5' aluminum handled nut wrench with dual threaded shafts. Excellent except for a small flaw on handle. ASBURY PATENT - CHAMPION - - - J. ASBURY WARRANTED - 10' all metal nut wrench with an unique adjustment screw mounted on the side of the curved handle. BORNSTEIN'S IMP WRENCH PAT. AUG 26, 1890 (some weak markings) - - 10' wood handled nut wrench with patented double screw action for fast adjustment with a locking collar. Advertised as Bornstein's Improved Patent Vise Wrench by American Improved Wrench Co.

Of Boston, Mass. And patented by Henry Bornstein of Boston. Unmarked - - 8' rack type quick adjust nut wrench with wooden handle. Patentee and manufacture not known. Good with light pitting and surface dings, minor nicks and crack on handle (S552, on info) 0009.

COES - WORCESTER, MASS. COES PAT'D AUG. 16, 1853 (weak markings on reverse side, not all readable) - - 12' Coes Double Screw Nut Wrench patented by Aury Coes. A very early desirable patented wrench with interesting adjustment mechanics that seldom comes up for sale. This is only the second I have had to list, one of the highlights of any antique wrench auction. Good with some dings, no patina. VAN DUIJL HOLLAND NO.

2 - MADE BY THOMAS CHATWIN LTD BIRMINGHAM - - 12' odd screw adjustable nut wrench. (not listed, no info) 0011. LEVER WRENCH - THE LEVER CO NY - PAT APPL'D FOR - - 8' all steel automotive type wrench with a lever to apply final tightening.

Patent not found. Good+ (S509) 0012.

PAT NOV 27, 94 - FATKIN MFG CO NY - - 9.75' different screw adjust pipe wrench with pivoting lower jaw. Advertised as 'The Defender'. Good++ (S599) 0013. Unmarked - - 12' wood handled center screw adjust wrench with dual jaws for pipe or nuts (see Lot No. 264 for single jaws version). This wrench was advertised as 'Rouse's Yankee Combination Pipe, Bolt and Nut Wrench'. Patented by J.

Sanders 7-18-1882 and mfg by R. Of Indianapolis, IN (earlier by Noblesville Foundry & Machine C0. Of Noblesville, IN). Good with some minor dings and light pitting. (see S618, C270) 0014.

EVANS PAT'D ZIP GRIP - L.A. - - 7.5' quick adjust pipe wrench with helical shaft and sliding collar.

Patented by Edwin Evans of Venice, California. WINNER TOOL CO - PUYALLUP, WASH - 10' PIPE WRENCH PAT'D 1925 DROP FORGED CHROME VANADIUM - - 9.75' rack type quick adjust pipe wrench. Excellent uncleaned condition. (not in Schulz, patent not found) 0016.

CLIPPER 14 / PATENT PENDING - - 15.5' malleable self adjust with replaceable jaw inserts. Good with some light pitting. Unmarked - 6' unusual center screw adjust nut wrench. May be shop made?

(not listed, no info) 0018. ARMSTRONG - BRIDGEPORT, CONN. / THE ARMSTRONG RAPID No. 27, 83 - - 11.75' rack type quick adjust with a lever for applying additional tightening pressure.

1879 patent was issued to Dan Foster of Waltham, MA, the 1883 to Frank Armstrong, Bridgeport, CT. Excellent original condition except for a letter 'H' punched over markings on one side. (S474, C42) 0019. AMERICAN WRENCH & SPECIALTIES CO CHICAGO USA / No. 10 - - 10' quick adjust nut wrench with cylinder on handle that releases and tightens lower jaw.

Good++ with most of the original nickel plating. 8 IN GEARENCH (sic) TRADEMARK - FORGED STEEL - PATENTED / GEARENCH MFG CO. - HOUSTON TEXAS - - 8.25' quick adjust patented by Joseph Peterson of College Station, Texas on 6-1-26. Good+ with some minor dings. BROOKS PATENT / LOCK BOTTON NUT FEFORE USING - 7' adjustable nut wrench.

Very unusual caliper like mechanism with two handle shafts connected by two adjustment screws. (not listed, no info) 0022. PAT JAN 11, 1876 - JAN 9, 1877 - - 12' all metal cast malleable monkey wrench patented by O. North of New Haven, Conn. Scarce covered handle variant in a larger size than normally seen. Patented by Oliver B.

North of New Haven, Conn. Good++ with most of its original Japan finish. (S459) and 0023.

Lot of two: (1.) Unmarked - - 12' Taft's Railroad & Mowing Machine Wrench. A threaded shaft screw adjust nut wrench made by Geo. Taft in the 1850's and later by the Coes Brothers. Sometimes found with Taft's May 31, 1859 patent date. Good with some dings.

(S418, C295) (2.) Unmarked - - 8' Robinson Patent June16, 1885 Coes type monkey wrench with the adjusting screw supporting ferrule. Patented by Squire Robinson of Southington, CT. Good with some dings. Nice replacement handle. Lot of two: (1.) Unmarked - - 12' wood handled center screw adjust wrench similar to J.

Sanders 7-18-1882 patent mfg. Good+ with tight crack, no patina. (see S618, C270) (2.) UNION HARDWARE CO. - TORRINGTON, CONN. USA (some markings unreadable - - 10' Briggs's Pattern combination nut and pipe wood handled monkey wrench with hex adjusting nut. Good with some dings, no patina. Unmarked - - 17.5' self adjust pipe wrench.

Good+ with some light pitting, refinished. (not listed, no info) 0026. Unmarked - - 12.75' quick adjust two segment rack nut wrench with locking collar.

Crudely made, zealously cleaned. (not listed, no info) 0027. WILLIAMS ABCN-12 USA - - 14' pointed end construction (or spud) alignment wrench with Crescent type head.

Usually seen marked Klein, Williams brand is considerably rarer. Good+ with a couple edge dings.

(not listed) 0028. Marked only '1869' - - 14.75' screw adjust pipe wrench with a tightening lever. 1869 date refers to J.C. Rowe's patent No.

86,322 but Lucius O. Veber's (of Schuuyler's Lake, NY) patent of Aug. 10, 1875 is a better match. Good with minor dings, no patina. (S633, C315) 0029.

Unmarked - - 14 ' turn handle to adjust wrench with serrated jaws. Similar to wrenches found marked 'Ever Grip' which were patented. 9-7-1915 by William Estes of Ozark, Missouri. (see S626) 0030. GENUINE MCKIBB0N (etc.) / PAT.

NOS 1872780 - 1730671 - 1709589 - - 18' extra heavy duty adjustable alligator wrench with an unique sliding jaw and adjusting nut action. Made by the McKibbon Universal Wrench Co Nashville, Tennessee.

Joseph McKibbon of Columbia and Culleoka, Tennessee and later Los Angeles, CA. Received three patents for his pipe and nut wrench in 1929 and 1932.

The replaceable jaw insert is missing otherwise Good++. THE ARMSTRONG NO. 5 - PAT'D MAY 6, 84 / BRIDGEPORT, CONN. Rare center screw adjust pipe wrench, largest one I have seen. Patented by Nathaniel W. Vandegrift of Bridgeport, Conn.

Good with some grind marks on lower jaw, adjusting screw is stuck. HOE CORPORATION POUGHKEEPSIE, NEW YORK, USA / PATENTS PENDING. 26' self adj. With spring loaded jaw.

Rare large size with replaceable lower jaw insert and a spring loaded latch that holds the jaws open that aren't found on the smaller sizes. Patented Aug. 21, 1928 by Robert Hoe of Poughkeepsie, NY.

(similar to S361) 0033. THE WAKEFIELD WRENCH WORCESTER, MASS - NO. JUNE 30, 91 - OTHER PATS. PENDING - - 25' rack wrench that adjusts with a spring loaded top lever with serrated jaw inserts.

Patented by John Wakefield of Worcester, Mass. Larges example I have seen. Lower replicable jaw insert missing otherwise Good+ with some minor dings.

Marked only with '2' and a small odd plant? Logo - - 20.5' primitive looking pipe wrench that consists of a self adjusting type upper jaw and a one piece lower jaw and handle assembly that is turned to adjust. (unlisted, no info found) 0035. 3 - BULLARD WRENCH / PAT OCT.

27, '03 - - 17.25' self adjusting wrench with spring loaded pivoting upper and lower jaws. By the Bullard Automatic Wrench Co. Of Providence, Rhode Island under patents issued to Frank Bullard of Los Angeles, CA.

On July 7,1903, Good++. (S659) and Oct. QUICKSET - F.

MACKE & CO QUICKSET - KOKOMO, IND. APRIL 22 - 1919 - - 10' all metal screw and quick adjust pipe wrench. Patented by Joseph Nielander of Kokomo, Indiana.

Fair with severe pitting. (S616) 0037.SARGENT BROSNIHAN - PATENT SEPT. 4, 1900 - - 12.' Coes type wood handled pipe wrench with a distinctive serrated jaw inserts/ Made by Sargent & Co. Of New Haven, Conn. And patented by Thomas Brosnihan of Livermore Falls, Maine. Good++, refinished.

Unmarked - - 10' example of 'Hewet's Union Wrench'. A wood handled nut wrench with a threaded hollow sleeve with a fluted grip patented by Henry Wheaton Hewet of New York, NY on Jan. 25, 1864 An early historically important wrench with a striking appearance. Good with some edge dings. Refinished metal, unreadable markings. Boston Wrench / Patent Dec 5, 1876 - - 10' center screw adjust nut and pipe wrench with open loop handle and serrated jaws. Patented by Daniel C.

Stillson of Somerville, Mass/ (inventor of the Stillson pipe wrench). Good++, refinished. (see Cope pg 74) 0040. Unmarked - - 13' all metal unusual self adjusting nut wrench with a spring loaded pivoting head. First one I have seen. Patent was granted to Harry Scheffer of Aixla-Chapelle, Rhenish Prussia, Germany on Nov 20, 1903. Excellent with former owners id 'LOW'.

(not listed) 0041. EMPIRE - WM HJORTH & CO. JAMESTOWN, N.Y. 11, 1903 (error correct patent date is Aug 7, 1903) - 14 / PAT DEC 29, 1896 - - 13' quick adjust pipe wrench patented in 1896 by James Pierce and 1903 by Karl Peterson (founder of the Crescent Tool Co.). Good++, refinished.

(S669) and 0042. 14' MAGNUM TOOL CO - PAT PEND / MUESCO - HOUSTON, TEXAS - - 13' self adjust wrench with a pivoting, spring loaded upper jaw that can be set to four different notches on the handle. Patented by Carlos V. Claire, San Bernardino, CA.

Also found marked Magnum Pipe Wrench vs. Muesco - Houston, Texas. WINDSOR MANUF'G CO - WINDSOR, VT - PATENTED JAN 24,1860 - - 12' wood handle center screw adjust nut wrench patented by J. Neil of New York, NY., A pre Civil War patented wrench. Good+ with some dings, refinished. (S427, C339) 0044. Unmarked (Gates Bolt Wrench) - - 12' all metal nut wrench with an unique adjusting screw on top of upper jaw.

By Alfonso D. Gates of Cleveland, OH and mfg. By the Lorain Wrench Co.

Of Lorain, Ohio. Good+ with some edge dings. BOYNTON'S PATENT / PAT'D JUN 14 - 1887 - - 15.5' Heavy-duty screw adjust alligator wrench made by the Campbell Printing Press & Mfg Co. Straight lower jaw variant which was covered by the patent issued to Edward S. Boynton of New York, NY. WESTCOTT - THE KEYSTONE MFG.

/ 12 INCH NO. 82 - BUFFALO NY USA - - 12' S-handled Crescent type wrench, solid handle variant. Excellent, refinished. KARU - SIRENA-ROMA 16-33 / D.R.P - 2D.R.G.M - - 11' unusual pliers type nut wrench with spring loaded lower jaw and adjusting lever. Good++, no patina. (not listed, no info) 0048. AMERICAN SAW CO - TRENTON, N.

/ PATENTED SEPT 6, 1892 - - 12' all metal heavy duty center screw adjust pipe wrench advertised as the Stevenson Wrench. Patented by George Stevenson of Chicago, ILL. Good++ with minor edge dings (C39) 0049. OTTO BUCH - GARANTIE - 1-1/2' (with railroad boxcar logo) - - 17' all metal plier type wrench with threaded shaft and knurled adjusting nut. (not listed, no info found but look similar to Swedish Bahco wrench S781) 0050. ANY ANGLE WRENCH - PATENT NOV1916 - LIMA., O.

USA / DROP FORGED STEEL - - 8.5' Crescent type with an adjustable angle head. By Atco Wrench Co.

And patented by Ramson Bovee. ANGLE WRENCH / BLOOMINGTON, ILL - PAT.

PEND.- - 9' Crescent type with a button that allows the head to be set at various angles. By the Imperial Tool Co. Of Bloomington, Indiana and patented by Ransom Bovee of Chicago, Illinois on Nov. Good+, release button spring is missing or broken.

BUFFUM TOOL CO (with two Swastika logos) / LOUISIANA, MO - - 8 IN - - 7.75' curved handled Crescent type wrench. Scarce brand Crescent in Good++ condition.

WRIGHT WRENCH CO - MADE IN USA / - STEEL FORGING - PAT 3 - 0 4, 1 - 09 - - 10.5' all metal rack type quick adjust nut wrench. Patented Mar. 15, 1904 by Lewis Ash and Hiram Stewart of Hassel, Mont. 26, 1909 by James Wright of Philadelphia, PA. Good++, missing lower jaws stop peg.

(similar to S543, C342) and 0054. Marked only PAT APPL'D FOR - - 10' self adjusting spring loaded alligator wrench with screwdriver extension on end of handle. Similar to the Gregory Wrench. GRIPLOCK PLIER WRENCH - PAT'D 1-22-24 - OTHER PAT. PEND.- NORFOLK, NEBRASKA USA - - 8.25' long nose version with two curved jaw sections of the Griplock Plier Wrench. Patented Jan.

05, 1926 by William Tull and Roy Bristol both of Stanton, Nebraska (date on wrench is not the correct date). (S261T) 0056.

GRIPLOCK PLIER WRENCH - PAT'D 1-22-24 - OTHER PAT. PEND.- NORFOLK, NEBRASKA USA - - 7' short nose version of the Griplock Plier Wrench.

See long nose version (Lot 55 above) for patent information. Good+ with some pitting. (S261T) 0057. Marked only 'C-29' - - 6.75' unusual center screw adjust nut wrench. Good+, adjusting screw is stuck. (not listed, no info) 0058.

WIZARD - THE RICHARDS MFG CO AURORA, ILL - PATENTED MAY 21, 07 OTHER PATS PENDING - - 8' adjustable wrench that combines a double screw Crescent type adjustment on a ratcheting head. Patented by Joseph N. Noyer of Gould City, Washington.

Good+ with some light pitting. (S156T) 0059. KIBLER - PAT. OCT 30, 1900 - 9.5' nut or pipe wrench with an unique sliding handle that has notches that engage in one of three different pins on side of wrench. Patented by John P.

Kibler of Eura, Virginia. Scarce wrench, only second one seen. Good++, uncleaned. RHINO 14 IN - PAT. 143898 / RHINO TOOL & MFG.

CO - - 13' self adjust pipe or nut wrench with a spring loaded pivoting upper jaw. Design patent No. 143898 was issued to Archibald Brintnall of Denver, Colorado on Feb 19, 1946. Note: Marking variation also found marked RHINO WRENCH CO.

Excellent with original finish. TIGER GRIP MP'LS (MINNEAPOLIS) MINN. / DROP FORGED - PAT APLD - - 6' hinged end self adjusting alligator wrench. Excellent (S719) 0062. ATHOL MACHINE CO - ATHOL MASS - USA - - 6' all metal comb. Screw and quick adjust wrench with a spring loaded bar that releases the lower jaw from the screw threads.

Patented June 8, 1889 by Stephen Bellows of Athol, Mass. And advertised as the 'Rapid Transit Wrench' Good, pitted on reverse side, stamped former owner's initials (E.C.). (S526, C46) 0063. BOSTON, MASS - PAT JULY 7, SEPT 22, 1903 - OCT 3. 1905 - -15.5'.

Advertised as 'The Irland Automatic Pipe Wrench'. Uses a spring-loaded lever underneath the handle to open the upper jaw, which closes automatically. Patents were issued to David Irland of Chicago. Good+ with some minor damage to jaw serrations, few minor dings, punched former owner's initials (WP). (S681) and and 0064. 'VICTOR' TRADEMARK / BONNER'S PAT.

1902 - 1903 - - 15' quick adjust pipe wrench made by the Bonner Mfg. Of Chrisman, IL. And patented by Clarence E. Bonner, Cherrypoint, IL. Good with some pitting.

THE VLCHECK TOOL CO - PAT APP'D FOR / NO. 2 - - 10.25' adjustable spanner wrench with a sliding upper jaw with spanner peg. Made by the Vlchek Tool Co. Of Cleveland, Ohio.

Pat 1-18-1916 by John Bartenstein. (not in Schulz, see Cope page 316) 0066.

SHEFFY MFG CO. JAN 21, 1896 - CHICAGO / CHICAGO - 1 - - 9.5' self adjust nut and pipe wrench with articulating upper and lower jaws.

Patented by Jay Sheffy of Chicago. CLICK PLIERS - CLICK MFG CO FAIRBURY, NEBRASKA / PATS 2358858, 2,325,245., (etc.) - - 9' with a u-shaped clip to set the lower jaw to different positions.

27, 1943 and Sep. 26, 1944 by Joel Hahn of Beatrice, Neb. The spring wire that holds the u-shaped clip is missing and one end of the u-clip has been peened, otherwise Good+. 8' CYGNET WRENCH / CYGNET MFG.

- BUFFALO, NEW YORK - PATENTED - - 8' Crescent type with a pivoting head that allows the jaws to ratchet. Patented by Henry D.

Rahling of Buffalo, NY on Oct. TIGER GRIP MP'LS (MINNEAPOLIS) MINN. / DROP FORGED - PAT APLD - - 8.25' hinged end self adjusting alligator wrench. Excellent (S719) 0070.

LEVER WRENCH CO - DULUTH, MINN / HEIMBACK PATENT 1915 - - 8' quick adjust nut wrench with lever and rack teeth. Patented 6-8-1915 by Alton Heimbach of Duluth.

Smaller size than normally seen. Good+ with light pitting. WAKEFIELD WIZARD - No. 120 - MADE IN WORCESTER, MASS.

- PATENTS PENDING IN USA AND FOREIGN COUNTRIES - - 8' double ended nut wrench with quick adjust sliding jaws. Patent was granted on. Oliver of Worcester, Mass. And assigned to Clarence E. Wakefield also of Worcester. (S1099, C317) 0072.

Unmarked - 6' pliers type wrench similar to Foot Print brand but with a screw adjustment. (not listed) 0073. BREVET CAN - - 6.5'. An odd quick adjust nut wrench with a simple but effective adjustment. The sliding lower jaw binds up and locks on the shaft when pressure is applied to a nut. (not listed, no info found) Piano Tuner's Wrenches (Lots 74 thru 78) Listed as Piano Tuning Hammers in old catalogs. Marked only '48' - - 11.5' wooden handled piano turners hammer wrench with eight point socket.

(similar to S896) 0075. LYON & HEALY - CHICAGO - -10.75' wooden handled piano turners hammer wrench with eight point socket. (similar to S896) 007. - - 10.5' wooden handled piano turners hammer wrench with double telescoping heads (both have square four point sockets).

(see S896 for single headed example) 0077. LANG & CO - CHICAGO - - 10.5' wooden handled piano turners hammer wrench with telescoping head and eight point socket. Good++ with tight handle crack. (similar to S896) 0078. SCHAFF - CHICAGO - - 11.5' wooden handled piano turners hammer wrench with eight point socket. (similar to S896) 0079.

ROBINSON / DROP FORGED STEEL - - 6' curved handled Crescent type. WRIGHT PAT'D JUNE 30, 96 - - 8.25' all metal screw adjust pipe wrench with two piece lower jaw Top jaw has replaceable serrated insert Patented and mfg. By Edward Wright (later by Peck, Stow & Wilcox). Fair with pitting. WRIGHT WRENCH CO TRADEMARK (weakly marked) - WRIGHT WRENCH TACOMA, WASH. / PAT 3 - 04 STEEL FORGING - - 8' rack teeth type quick adjust nut wrench.

WRIGHT PAT OCT. 3, 93 - - 9' all metal screw adjust nut and pipe wrench with a lever for final tightening or releasing. Made by the Wright Wrench Co. Of Worcester, Mass and patented by Edward Wright of Worcester.

(similar to S643, C342) 0083. Lot of two: STEPHENS WRENCH / PAT'D DEC 21, 09 pivoting head open end wrenches. Patented by Harry E.

Stephens of Elgin, IL. Good++ with drilled hang hole. (2.) 9.5' with 5/8 marked on jaw. - WORCESTER, MASS / (can't read markings on reverse side) - - 10' Coes wood handled monkey wrench with spilt split knurled adjusting knob. Taft's patents of 11-1-1863 and 2-23-1864 apply. Advertised by Coes as the Mower & Reaper Wrench (later Mechanic's Wrench).

Good with some pitting. (see HP31 thru 34) and 0085.

COES & CO - WORCESTER MASS (some markings not readable) - - 12' wood handled nut wrench with center nut and shaft threaded on edges only. Advertised as Taft's Railroad and Mowing Machine Wrench pat 5-31-1859 by George C. (HP13, S418) 0086.

Unmarked - - 10' center screw adjust wood handled nut wrench with an unusual lower jaw assembly that completely surrounds the threaded shaft. The few that have been seen were not marked. Good+ with nice replaced handle. (not listed, no info found) 0087. COES - WORCESTER MASS. COES - PAT'D MAR.

6, 1866 - - 10' with two piece locking ferrule. Good+, minor dings, tight handle crack. Unmarked - 10' early Coes (c. 1841 thru 1853) wood handled monkey wrench.

An example of Loring Coes first wrench patent of April 16, 1841 with plugged lower jaw Good+. (see HP 1 thru 3) 0089. TRIMO 8' (on shaft) - TRIMO (on lower jaw) / TRIMONT MFG. CO - ROXBURY, MASS - - 8' size wood knife handled with the U-shaped type nut guard. BONNEY HERCULE ALLENTOWN, PA. USA (with Bonney Shield logo) / SOLID BAR - PAT.

14, 96 - MADE IN USA - - 15 ' wood knife handle monkey wrench. Patent was issued to Robert Cosmos Ellrich of Southington, Conn. And assigned to Peck, Stow and Wilcox Co.

Of Southington, Conn. WORCESTER, MASS / PAT. MAY 2, 71 & DEC 26, 71 (with steam engine governor logo) - - 15' jog bar wood handled monkey wrench. Good++, tight handle crack, refinished. (HP21) and 0092.

- WORCESTER MASS / steam engine governor logo with 5-2-1871 and patent dates) - - 12' Coes wooden handled Jog bar type. (HP22) and 0093. THE LAMSON & SESSIONS CO. - CLEVELAND, O. USA / ENGINEERS - CASE HARDENED - - 10.5' wood handled monkey wrench with extended ferrule shoulder that holds the adjusting screw in place (Matthew Campfield's 5-9-1892 patent). ROBINSON PATENT JUNE 16, 1885 - - 12' Coes type monkey wrench with the adjusting screw supporting ferrule.

Patented by Squire Robinson of Southington, Conn. Good+, few dings. ROBINSON PATENT JUNE 16, 1885 - - 8' Coes type monkey wrench with the adjusting screw supporting ferrule.

Patented by Squire Robinson of Southington, Conn. - WORCESTER MASS / PAT'D MAR 6, 1866 - - 8' jog bar wood handled monkey wrench.

First of the Coes models having the one piece ferrule secured by and internal nut. ROBINSON PATENT JUNE 16, 1885 - - 8' Coes type monkey wrench with the adjusting screw supporting ferrule. Patented by Squire Robinson of Southington, Conn. Good+ with hex nut on end of handle.

- WARRANTED / PATENTED JUNE 16, 85 - - 10' wood handled monkey wrench with Squire Robinson's (Southington, Conn.) patented extended ferrule shoulder that holds the adjusting screw in place, Rare to see this feature on a Peck Stow & Wilcox wrench. Good with some surface dings. COES PATENT / _ _ _ MASS. - - 10' Very early rare Coes wooden handled monkey wrench with plugged lower jaw and an unusual divided adjusting knurl. Manufactured under Loring Coes first wrench patent of April 16, 1841.

Although the markings are too weak to be certain this is probably marked 'C. Foster & Co.' The second Coes exclusive wrench sales agent with a contract from 1843 to 1848. Good+ (see HP2) 0100.

- WORCESTER MASS / steam engine governor logo with 5-2-1871 and patent dates) - - 10' Coes wooden handled Jog bar type. (HP22) and 0101. Marked only with a '3' - - 8.25' wood handled monkey wrench. Probably an import, has right instead of left handed threads on the adjusting bolt.

(not listed, no info) Threshing Machine Cylinder Tooth Wrenches (lots 102 thru 108) 0102. 8, 4 - - 17' threshing machine cylinder tooth ratchet wrench with two square sockets (1' & 1-1/4').

Patented Mar. 08, 1904 by William R. Johnson of Freeport, Illinois. (S45, R1-455) 0103. Unmarked (The Success Cylinder Wrench) - - 15' tee handled ratcheting cylinder tooth wrench a 1-1/4' square socket. The Success was mfg.

By the Parsons Band & Self Feeder Co, (Newton, Iowa) and later by the Maytag Co. (Newton, Iowa). Has some pitting. (S44, R1-317 & 318) 0104.

8, 04 - - 17' threshing machine cylinder tooth ratchet wrench with a 1-1/4' square socket. Patented Mar. 08, 1904 by William R. Johnson of Freeport, Illinois.

Good+, handle is missing. (S45, R1-455) 0105. 8, 04 - - 17' threshing machine cylinder tooth ratchet wrench with 1-3/8' hex socket.

Patented Mar. 08, 1904 by William R. Johnson of Freeport, Illinois. (S45, R1-455) 0106. JOHNSON STORDEN MINN.

/ PAT APL'D FOR - - 18.5' with 1' square sockets. Patented by John P. Johnson of Storden, Minn. And advertised as the Improved Boss cylinder tooth wrench. (not in Rathbone) 0107.

8, 04 - - 17' threshing machine cylinder tooth ratchet wrench with 1-1/4' square socket. Patented Mar. 08, 1904 by William R. Johnson of Freeport, Illinois. (S45, R1-455) 0108. THE HANDY WRENCH / PAT MAR 30 1926 - 22' chain drive threshing machine cylinder tooth ratchet wrench fitted with a 1-1/8' square socket. By Port Huron Machinery & Supply Co.

Of Lincoln, Nebraska and Pat. 30, 1926 By Reuben D. Litwiller of Seward, Neb. Excellent, no handle. (S46, R1-215) Farm Related Wrenches - First Group (lots 109 thru 210) 0109. NEWELL SANDERS PLOW CO A260 (later IHC) - - 19'. (R1-351) 0110.

UX5 / 1/2 (Gehl Bros. And Western Land Roller) - - 15'.

This wrench is listed in both Gehl Brothers of West Bend, Wisc. And Western Land Roller Co. Of Hastings, Nebraska parts books. (R2-112, R2-292) 0111. Wind Engine & Pump Co. - Batavia, Illinois - - 11'. Good++ (R2-) 0112.

MALSBARY 6180 (Holt Mfg. - Stockton, Calif.) - - 13.5'.

Made the Malsbary Gain Drill. (R1-306) 0113. PEARL 5 (orphan) - - 6.5'. Note: Rathbone shows a Pearl 3 but not a 5. Would be graded excellent with original finish except two jaw ends have been ground, (not listed see R374) 0114.

STERLING M'F'G. - D127 / STERLING ILL. - C - - 12' with large striking lettering. Good++, repainted. (R1-439) 0115.

/ A1 (orphan) - - 9'. 767 (Monitor-Moline) - - 9'. The scissor wrench. Good++, not cleaned.

(R1-332) 0117. - Barre, Mass.) - - 9' oddball. Marked on shaft variant, Tip of hook broken off, otherwise Good++. 125 (David Bradley Mfg. - Bradley, Illinois - - 6.5'. (R2-72) 0119.

E307 (Rosenthal Corn Husker Co. - West Allis, Wisc.) - - 16.5' long double square socket. Good+ with some pitting. (R1-402, R3-189) 0120. OHIO CHILLED / NEW IMPERIAL (B & G Plow Co. - Canton, Ohio) - - 9.5'. (R1-31) 0121.

B & G Plow Co / Canton O (Bucher & Gibbs Plow Co.) - - 9.75'. Good+, light pitting. (R1-31) 0122. AVERY & SONS / CHILLED PLOW - K209 (Louisville, KY) - - 9.5'. (R1-27) 0123. MOLINE PLOW CO. / WP241 - - 10.5'.

(R1-333) 0124. S (Wiard Plow Co. - Batavia, NY) - - 11.25'. One broken jaw ear. (R1-488) 0125. REEVES / 3378 (Reeves & Co.

- Columbus, Indiana, later Emerson-Brantingham) - - 11.5' Reeves tractor wrench. Good+ with a casting flaw on one jaw.

(R1-393) 0126. MORRISON 260 (Morrison Mfg. - Fort Dodge, Iowa) - - 10'. Light pitting.

(R1-340) 0127. MOLINE PLOW CO / B169 - - 14'. Good+ with light pitting. (R1-332) 0128. Unmarked (South Bend Chilled Plow Co. - South Bend, Indiana) - - 16.5' big graphic wrench with several cutout sections.

Used on South Bend's New Casaday Sulky Plows. Labeled 'Octagon' in South Bend Parts Books and nicknamed 'The Three Pound Wrench' by collectors. (R1-429) 0129. GEISER MFG' CO. / WAYNESBORO PA. 597 - - 15.5' Steam Engine wrench.

(R2-113) 0130. 880C (Case T. Steam engine wrench) - -16.5'.

(R1-81) 0131. 918 (Delaval Cream Separator) - 8'. Jaw has been ground. (R1-141) (R2-77) 0132. K29 with a 'P' in a circle logo (La Crosse Plow Co.

- La Crosse, Wisconsin) / (ruler markings) - - 14.25'. Number only variant. Excellent with traces of original paint. (R1-289) 0133. 1340 (Nichols & Sheppard, Battle Creek, Mich.) - - 13.5' double open ended steam engine wrench (straight ends variant). (R2-216) 0134.

Unmarked valve port plug wrench - - 10.25'. Shown in parts lists for Heider/Rock Island Gas Engine Tractors (part No. Yuba Ball-Thread Tractors (part No. B445) and Gray Tractors.

Would have been used on other tractors and trucks that used Waukesha engines. Good+ with light pitting. (R1-501, R2-249, R3-96) 0135. STARBUCK - - 13' odd malleable cast wrench with spanner and open end. Excellent with outstanding markings. 040272 (Allis Chalmers) - - 6' tee handled socket wrench. Some pitting.

(ID from parts list, not in Rathbone) 0137. 286 (Blount Plow Works, Evansville, Ind.) - - 10'. Fancy multi-opening wrench including one for wing nuts. (R2-37) 0138. 286 (Blount Plow Works, Evansville, Ind.) - - 10'. Fancy multi-opening wrench, no wing nut opening variant. (R2-37) 0139.

SEEDER (Seeder Mfg. - Homer, Mich.?) - - 8'. Thick, heavy. Two jaw ears missing.

Most of the few I have seen have broken jaws. (R1-420) 0140. DEMPSTER / 1 (Dempster Mill Mfg.

Co, - Beatrice, Neb) - - 7.5'. Good+ with some pitting. DOWAGIAC (Dowagiac Mfg. - Dowagiac, Mich.) - - 9' Good+ (R1-149) 0142. DOWAGIAC / F97A (Dowagiac Mfg. - Dowagiac, Mich.) - - 5.5'. Good++, green paint.

(R1-149) 0143. H272 (IHC, Aultman Miller Corn King Spreader, and Little Giant Fence Loom) - - 15'. Round hole with key and square box with three rectangular and three square openings on shaft. (R1-24) 0144. 'L' in a triangle logo (Lynchburg Plow Co. - Lynchburg, Virginia) - - 9' double open end S-wrench. Some minor pitting.

(R2-174) 0145. SBCP Co / 379 (South Bend Chilled Plow Co) - - 9.25' with hammer poll. HOKE MFG CO (South Bend, Indiana) - - 8.5'.

(R1-235) 0147. P17 (Stoddard) - - 8'. (R2-270) 0148. GALE 26 (Gale Mfg. - Albion, Mich.) - - 10'.

(R1-193) 0149. / TAUNTON, MASS.

USA - - 13.75' single ended wrench with large bold lettering. Good++ with red paint. (R1-234) 0150. 3050 for pitman (Adriance / Moline Plow Co.) - - 7.25'. (R1-332) 0151. MONARCH 226 (Lisle Mfg.

- Clarinda, Iowa) - - 4.5'. (R1-297) 0152.

123 (David Bradley) - - 6.75'. Markings are vertical on the shaft.

(R2-73) 0153. AW-11 (Orphan) - - 16' oddball with more holes than wrench. Good++, not cleaned. (not listed) 0154. A165 (Minnesota Prison Industries) - - 5.5'. (R3-154) 0155. OK1294 - Case Eagle logo (Case T.

H-shaped with pitman flange. The 'goal post wrench'. STRATER & SON - - 5.25'. (R1-443, no info) 0157. S699 (Ohio Cultivator Co.

Bellevue, Ohio) - - 9.5'. (R1-357) 0158. Lot of two: (1.) 44 (Brown-Manly Plow Co. - Malta, Ohio) - - 8.25'.

(R1-66) (2.) Marked only with a 'Z' in an oval logo (Brown-Manly Plow Co. - Malta, Ohio?) - - 8.25'. 642 (Gale / Ohio Rake) - - 6.5'. (R1-193, R1-359) 0160. Lot of two: (1.) 832A (David Bradley) - - 13' with hook spanner on one end.

(R1-126) (2.) AMERICAN HARROW CO / DETROIT DISC - DD36 - - 15' with hook spanner on one end. Severe pitting. (R1-14) 0161. Unmarked (orphan) - - 11' oddball, unusual design. Excellent, (not listed, no info found) 0162. LEHR (Lehr Co.

- Fremont, Ohio) - - 9.5' with hammer head. Scarcer no part number variant. (R1-295) 0163. Unmarked (orphan) - - 12' thick and heavy impressive looking oddball. Excellent, not cleaned.

(not listed, no info found) 0164. C126 (with an 'X' logo) (D. - Brockport, NY) - - 8.75'. Good++ (R3-158). Marked only '17' (orphan) - - 13.75' large thick orphan. Some pitting.

(not listed, no info found) 0166. Lot of two: (1.) TIGER 240 (Stoddard - Dayton, Ohio or J. Rowell, Beaver Dam. Wisc.) - - 8'.

(R1-441) (2.) COLLINS PLOW CO / 124 - - 7.5' with a hammer head. (R1-108) 0167. 71 (Wiard Plow Co. Batavia, NY) - - 9.5'.

Rarer three open ends variation. (R2-194) 0168.

1999 (Silver Mfg. Ohio) - - 13.5'. Painted, some pitting. (R1-424) 0169. 8 (Moline Plow Co) - - 10.5' combination wrench and claw hammer, hollow handle variant with square socket wrench in end. Good+ with some mushrooming on hammer head.

(R1-332, R3-157) 0170. 8 (Moline Plow Co) - - 10.5' combination wrench and claw hammer, solid handle variant. (R3-157) 0171. Lot of two: All Aluminum Single Opened Wrenches for Dairy Equipment. Both unlisted. (1.) DAMROW BROS 25H1 / FOND DU LAC WIS AE - - 11'.

(not in Rathbone) (2.) WOODLAND FDY. INC / WOODLAND WIS - 1-1/2 - -11'. (not in Rathbone) 0172. H & D YORK PA (Hench & Dromgold - York, Penn.) - - 7.25' with small hammer head. (R1-228) 0173. CHALLENGE (Batavia, Illinois mfg.

Windmills, gas engines, etc.) - - 7'. Good+ with some pitting. (R1-93) 0174. Lot of three: Unmarked orphans. One is shown on Rathbone's Oddball Page all Good++ or better.

(see R1-504) 0175. Lot of two: (1.) Unmarked Dempster C11 (Dempster Mill Mfg. Co, - Beatrice, Neb) - - 10'. (R1-143) (2.) R11 (Gale) - - 9.25'. Two open ends by octagon box end.

Good+ with light pitting. (R2-109) 0176. Lot of two: (1.) W 102 (orphan) - -10' oddball. (not listed, ) (2.) 68 (Case Threshing Machine Co.) - - 9' early and rare Case wrench just recently identified from a listing in a Case Road Machinery Parts List. Used on road graders, drags and scarifiers.

The 68 wrench was replaced by the 222J wrench and looks like the unidentified 1G75 wrench, Good+. (R3- 42) 0177.

Lot of two: (1.) 41 (orphan) - - 8.25'. (not listed, no info found) (2.) MF 128 STD - - 7' oddball little four opening wrench. Owner's tags states purchased Aug.

17, 1996 at Al Schulz's Auction. (R1-303 with no info) 0178. E13 (Moline Plow Co) - - 9'. (R3-157) 0179. Lot of three: (1.) 541 (orphan) - - 7.5' with three open ends and extended square box.

Painted black over pitting. (not listed, no info) (2.) 40 (orphan) - - 6'. Rathbone lists a Number 40 wrench for Brennan Kentucky Drills and Lindeman but no picture of either one. (3.) I-1 (orphan) - - 7' oddball. (not listed, no info) 0180. Lot of two: (1.) 1562 (George W.

- Galesburg, Illinois) - - 11.5'. (listed in Rathbone's Supplement, not pictured) (2.) 916 (Monitor Drill / Moline Plow Co.) - - 7'. (R1-332, R1-334) 0181. 8Z (or Z8) (orphan) - - 11'. (R3-84) 0182. 886C (with 'X' logo) - - 7.75' (Case T. Steam engine wrench).

(R1-81) 0183. 70 TO 83 (Wiard Plow Co. - Batavia, NY) - - 9.75'. (R1-488) 0184. Lot of two: (1.) A763 (Monitor Drill Co. - Minneapolis, Minn., later Moline Plow Co.) - - 7'. Don't overlook this one.

It's appears to be the same wrench as the Monitor A270 but marked A763. Good++ except for a jaw corner crack. (not pictured in Rathbone) (2.) Famous Ohio - J276 (Ohio Cultivator Co. Bellevue, Ohio) - - 9.5'. Light pitting. (R1-357) 0185. A28 (orphan) - - 10'.

(not listed, no info found) 0186. Z300 (Oliver) - - 9'. (R1-361) 0187. OLIVER / CP245 - - 9.25'.

Good++, black paint. (R1-361) 0188.

F153 B (Oliver and IHC) - - 9'. Note 'B' marking variation.

(R1-360) 0189. AVERY AND SONS / J97 - - 10'. (R1-27) 0190. AVERY AND SONS CO - C63 / LOUISVILLE KY USA - - 10' with hammer head.

(R1-27) 0191. AVERY & SONS - G176A / Louisville KY USA - - 8.5'. (R1-27) 0192. LG114 (originally Emerson-Brantingham, Rockford, ILL. Later Case T. Co.) - - 6.75'. (R3-42 under Case T.

D304 (Eureka Mower Co. - Utica, New York) - - 9'. (R1-169) 0194. M555 / MADE IN U.S.A. (Massey-Harris) - - 5.5' pitman wrench. (R1-312) 0195.

(Massey-Harris) - - 11' auto type wrench. Note not marked 'Made in Canada' variant. Good with drilled hang hole. (R1-312) 0196. 123C (Massey-Harris) - 8.5' all metal Vandegrift monkey wrench.

(R1-312) 0197. 1090C (Johnston Harvester - Batavia, NY later Massey-Harris) - - 7' Rare pitman wrench. First one we have had to sell.

(R2-151) 0198. Z435 - -8' without hang hole and one indented dot on front and one raised dot on reverse variation. (R1-312) 0199.

Lot of two: (1.) VULCAN PLOW CO / EVANSVILLE IND.- - 8' with pitting. (R1-475) (2.) M518 (Emerson-Brantingham, later Case T. Co.) - - 6.5' pitman wrench. (R1-162) 0200. FRAZER & JONES CO. (same markings both sides) - - 5.25' A neat little wrench. According to trade directories Frazer & Jones manufactured bicycles, malleable iron castings including Iron hames, saddlery hardware, and harness rings.

(R1-182, R3-84 ) 0201. BROBST BROS - - 5.25'.

First one I have seen. Brobst founded the Bloomsburg Carriage Co. At Bloomsburg, Penn. In 1849 and was joined by his brother in 1884. Excellent, (not in Rathbone) 0202. F2-0005 (Oliver and Nichols & Sheppard) - - 6' by 8.75' tee socket wrench.

(R2-217) 0203. BASE WRENCH / EP49 (Oliver / IHC Canada) - - 6.75'. (R1-360) 0204. Lot of five: (1.) Unmarked (orphan) - - 4' cast single open end wrench with rounded end on handle shaft. (no info found) (2.) Unmarked (orphan) - - 5' multi-opening cast wrench with pebble finish. (no info found) (3.) W21 (Mast, Foos & Co) - - 4.5' double open ended S-wrench for Mast, Foos Lawnmowers. (R3-142) (4.) MEINECKE - MILWAUKEE - - 4.25'.

Raised markings variation. Baby Buggy wrench? Meinecke made buggies, carriages, sleighs, baby carriages, Etc. (R1-324) (5.) Unmarked (Pickering) - - 4.75' cast single end wrench with loop handle for Pickering Steam and Gas Engine Governors. (R3-175) 0205.

Lot of two: (1.) OK CHAMPION / 59 (Champion Potato Co., Hammond, Ind.) - - 8'. (R1-94) (2.) HARDER / X60 (Harder Mfg. - Cobleskill, NY) - - 9.25'.

Severe pitting, (R1-216) 0206. FORDSON (with snail logo in extreme high relief) - - 10' S handled Crescent type. Handle has a slight twist.

(S756, R1-180) 0207. HARRY FERGUSON INC - TO-17014 / (with ruler markings) - - 10.5'. One of the harder to find wrenches with the ruler markings to measure the plow furrow depth. Good with light pitting. (R1-178) 0208.

Lot of two: Fordson Tractor Tool Kit Tools (1.) FORDSON (script) - - 9.5' all metal screwdriver. Markings are indented on shaft. (R1-180) (2.) FORDSON - - 6' double open end wrench. Good with some light pitting, not cleaned. 7B8975 (Caterpillar) with a 'M' in a shield logo - - 11.75' square box with scraper blade. (R3-43) 0210.

6F3703 (Caterpillar) with horizontal 'T' logo - - 8.5' double male hex drain plug wrench. (R3-43)) Four Inch Crescent Type Wrenches (Lots 211 thru 244) 0211.

4 DROP FORGED LAKESIDE/ 4 MADE IN U.S.A. LAKESIDE - - 4' Crescent type. Lakeside was a Montgomery Ward brand. S-K WAYNE DEFIANCE OHIO - - 4' Crescent type. Black finish, spots of minor pitting. S-K WAYNE DEFIANCE OHIO - - 4' Crescent type.

Plated finish 0214. LECTROLITE DEFIANCE OHIO / 4 IN. FORGED ALLOY IN USA - - 4' Crescent type. Lectrolite was consolidated with S & K in 1961.

4' TRUECRAFT 204 - - 4' Crescent type. Billings - Vitalloy 77-4 - - 4' Crescent type. BET'R-GRIP MADE IN U.S.A. FORGED VANADIUM STEEL 5/16 IN.- - 4' Crescent type with 5/16' hex box wrench at end of handle shaft.

Black finish. MFD BY McKAIG- HATCH INC. - - 4' Crescent type.

100 mm T & E TOOLS 100 CHROME VANDIUM / 4 inch 10204 DROP FORGED (has mm marks on jaw) - - 4' Crescent type. Aluminum finish with a black adj. Excellent, like new. 5/16 X 4' - GERMANY - - 4' Crescent type. A-4 HUSKY - - 4' Crescent type.

4 in VLCHEK (script) CLEVELAND, U.S.A. / CLIK-STOP PATENTED FORGED ALLOY STEEL - - 4' Crescent type. This is the first Vlchek four incher I have seen.

2,905,037 for the Clik-Stop wrenches was issued Sept. 22, 1959 to Carl W. Coslow of Los Angeles, Calif.

And was assigned to Pendleton Tool Industries, Inc. Of Los Angeles. Vlchek Tool was acquired by Pendleton Tool Industries parent company of Proto Tools, P & C, Penens Corp., etc. 4 DROP-FORGED G/S (in a hex shaped frame logo) / 4. Made IN U.S.A.

G/S (in a hex shaped frame logo) - - 4' Crescent type. G/S is a Gambles Store trademark.

4 4204 - S FLEET U.S.A. - - 4' Crescent type. Fleet tools started as Penens Corp. Was acquired by Plomb in the early 1940's.

Excellent, like new. 4' Forged Blue-Point ALLOY STEEL MADE IN U.S.A. / SNAP-ON TOOLS CORP.- KENOSHA, WISCONSIN - - 4' Crescent type. TIGER - - 4' Crescent type. Aptoide Ios Download No Jailbreak. Tiger was a Gambles brand. 'SUPERJUSTABLE' PATD - U.S.A.

/ J-H-WILLIAMS & CO - FORGED / ALLOY - - 4' Crescent type. First one I've seen with the 'PATD' marking. TOOLS 56704 SPAIN - - 4' Crescent type with blue plastic handle covering. Marked only GERMANY - - 4' Crescent type with triangle, square, small hex, and larger hex cutouts on handle shaft. 77-4' ALLOY IREGA (in a shield logo) DROP FORGED - - 4' Crescent type. F204 4' TRUECRAFT TOOL - JAPAN - - 4' Crescent type.

44 XCELITE-ALLOY / ORCHARD Park NY - - 4' Crescent type. - P & C (in a shield logo) 1704 - FORGED ALLOY STEEL - - 4' Crescent type. P & C was Peterson and Carlborg Hand Forged Tool Company of Milwaukie, Oregon They were acquired by Plomb Tools in 1941, 0234. P & C (in a shield logo) FORGED ALLOY STEEL / 4in.

- MADE I N U.S.A. - 4' Crescent type. Has some pitting.

91-4 UTICA TOOLS / FORGED ALLOY STEEL - USA - - 4' Crescent type. 90-4 U TI CA (in three diamond logo) TOOLS / FORGED ALLOY STEEL USA - - 4' Crescent type. Black finish 0237. 91-4 UTICA TOOLS U.S.A. / ALLOY - UTICA - STEEL - - 4' Crescent type.

= CRAFTSMAN = / Y (in a circle logo) 4 IN. = FORGED IN USA = - - 4' Crescent type. CRAFTSMAN MADE IN U.S.A. VANADIUM - 5/16 in - - 4' Crescent type with a 5/16' 12-point box on end of handle shaft, Made by J. Danielson for Sears.

Lot of four: Diamond Tool & Horseshoe or Diamond Calk Horseshoe Company 4' Crescent type wrenches. All different marking variations. One has a 5/16' 12-point box end for a hang hole. Lot of four: 4' Crescent brand adjustable wrenches. Each has different markings including one very early type. Lot of three: Proto 4' Crescent type wrenches.

Each with different markings including one CLIK-STOP. Lot of seven: 4' Crescent type wrenches, Mostly imports. Markings include HEAVY DUTY. GERMANY (with pebbled finish and hex box end) and CHINA.

A collection of eight key chain Crescent type wrenches. All 3' or under. Markings include Made in Germany, Taiwan, Hong Kong. Bicycle and Pocket Wrenches (Lots 245 thru 263) 0245. LONG WRENCH CO.

17, 1906 / DROP FORGED - - 5' sliding wedge adjust nut wrench. Patent was issued to John R. Long of Akron, Ohio. Good+ with some minor pitting on reverse side. (S549B, C203) 0246.

COES & CO PAT'D MAR 23 1869 / WORCESTER MASS - - 4-5/8' 'Baby Coes' monkey wrench. Patented by George C. Taft of Worcester, Mass. Good+ with some minor dings, a some weak markings. (HP35, like S852) 0247. STILLSON WRENCH MADE BY MOORE DROP FORGING CO. - SPRINGFIELD, MASS.

(not all markings are readable - - 4' miniature wood handled pipe wrench made by modifying a 6' wrench. Nicely none, Good++. Robert Bosch - STUTTGART (Bosch logo) - 3' center screw adjust with one side exposed. Some pitting.

(not listed) 0249. 135 - ROWE PRODUCTS - 642 / BELLFLOWER, CAL - - 4' motorcycle spoke or nipple wrench. ROLLFAST PERFECT / MADE IN USA - - 3.75' bicycle spoke or nipple wrench. (not listed, similar to S110L) 0251.

STEVENS NY / PERFECT - - 2.75' X 1.0625 bicycle spoke or nipple wrench. Good+, missing jaw spring.

(S110L) 0252. Marked only PAT APPLD FOR - - 7' rack type quick adjust with alligator wrench type jaws. (not listed, no info) 0253. NY USA with Williams' 'W' in a diamond logo - - 6.75'.

Rare salesman sample chain pipe wrench from the J. At least one other wrench company distributed these miniature versions of their chain pipe wrenches some of which were over six foot long. One of the older salesman who called on my hardware store could remember these miniatures laying on the table of factory rep's booths at hardware trade shows. Excellent condition 0254. 16, 98 - - 5.5' screw adjust bicycle wrench.

Patent was issued to Hubert C. Hart of Unionville, Conn. Produced by Upson and Hart of Unionville which later became the Upson Nut Co. Unmarked - - 4.75' stamped flat steel internal screw adjust bicycle wrench. (not listed) 0256.

BARCALO-BUFFALO - MADE IN USA - - 5' side screw adjust bicycle wrench. QUEEN (in script) / PATENTED NOV 13, '00 - MAR 11, 'O2 - - 5' side adjust bike wrench. Open back variation. Patented by Frank Mossberg and probably made by Mossberg for???

MECANICARM - BREVETE S. (French for 'Patented without any guarantee from the Government' - - 4.25' turn handle to adjust pocket wrench with twin jaws. Unmarked - - 4.25' example of the LIGHTNING WRENCH mfg. By the Racine Wrench Co. Co., both of Racine, Wisc. This combination quick and screw adjust Patent was issued to Ebenezer Rider of Racine, Wisc.

Rare wrench in the very desirable small size, Good+ with minor pitting, dings, brass quick adjust stop screw probably a replacement? UTILITY WRENCH CO LD.

NEW YORK - PAT'S AUG 13, 1878 - SEPT 4, 1883 (markings are not readable) - - 4.5' wooden handled quick adjust nut rack wrench with a spring loaded release lever and ultra fine rack teeth. High quality materials and workmanship. Patented by Henry W. Atwater of Newton, Mass. Desirable small size. Good with some minor pitting, some jaw edge damage, spots of light pitting., handle is Excellent.

STATIONERS INC. EAU CLAIRE - 2-6681 / MADE IN U.S.A.- - 3' advertising give away miniature screw adjust nut wrench with screwdriver on end of the handle shaft. GOLD STANDARD SPANNER - MADE IN U.S.A. With a decorative design - - 5' combination screw and rack type quick adjust bicycle wrench similar to a wrench marked The Waterbury Wrench Co (see S112).

First one we have had to sell and only second one I have seen. Good+ except that the edge of the lower jaw assembly is cracked. (not listed, no info found) 0263. Lot of three: Bicycle Type Wrenches (1.) Unmarked - - 3.75' center screw adjust.

(2.) - C - Mossberg WRENCH CO. - ATTLEBORO, MASS USA - PAT. NOV 19 & DEC 31, '95 - - 5' center adjust with edge slot to guide lower jaw.

Oil holes thru handle shaft variation. Patents were issued to Frank Mossberg.

Good with light pitting, few dings. (S103B) and (3.) Unmarked - - 4.5' center screw adjust with dual jaws and exposed shaft. Adjustable Nut - Second Group (lots 264 thru 301) 0264. ROUSE MF'G CO. - PAT, JULY 18, 1882 - - 10' single jaw variant see Lot No. 113 for dual jaw version) center screw adjust nut and pipe wrench.

Sanders 7-18-1882 and mfg. Of Indianapolis, Ind. Advertised as Rouse's Yankee Combination Pipe, Bolt and Nut Wrench. Good+, handle is probably an older replacement. (S618, C270) 0265. CRESSEY - PAT MAR, 1876 - 14' wooden handled screw adjust with coarse threaded shaft and spring loaded lower jaw.

Patented by Isaiah Cressey of Gloucester, Mass. Rare early wrench Excellent with minor handle dings. (S595, C111) 0266. PAT (only readable markings) - - 12' wooden handle center screw adjust nut wrench with staggered twin jaws. Looks like Canadian Patent No.

1,420 issued to Francis William Beckwith of Merrickville, ON Canada on April. 13, 1872 applies. Good+ with poor handle. GEDORE No, 130 / D. PATENT A - MADE IN GERMANY - - 12' complicated screw adjust wrench with locking and release levers. (like S777) 0268.

THE RIDER PATENT - PAT APPL'D FOR - LIGHTNING WRENCH / RACINE WRENCH Co. - RACINE, WISC.

(weak markings, not all readable) - - 8.5' all metal combination screw and quick adjust wrench. Knurled adjusting nut is pulled out to release rack teeth and spring loaded lower jaw assembly. Patent was issued to Ebenezer Rider of Racine, Wisc. Rare wrench in Good condition with hammering damage on edges.

PAT SEPT 20, 1921 - HANDEHAND - MFD BY H & E WRENCH CO. NEW BEDFORD, MASS.- - 10.25' helical screw quick adjust nut wrench. Patentees were Edwin J. Evans and George E.

Hemphill both of Salt Lake City, Utah. Good+ with a few minor dings. THE 'VICTOR' TRADEMARK / BONNER'S PAT. 1902 - 1903 - - 19.5' quick adjust pipe wrench made by the Bonner Mfg.

Of Chrisman, IL. And patented by Clarence E. Bonner, Cherrypoint, IL. MCKERCHER 14 / PATD FEB 13 1900 - - 12' self adjust pipe wrench. SHEFFY MFG CO.

JAN 21, 1896 - CHICAGO / SHEFFY - CHICAGO - - 17' self adjust nut and pipe wrench with articulating upper and lower jaws. Patented by Jay Sheffy of Chicago.

Good+ with some minor pitting and former owner's ID stamped on upper jaw and handle shaft (J. 8' OLIVER FORGED USA / PAT. HENGY - DETROIT, MICH - - 9' all metal pipe wrench with roller type lower jaw. Patent has not been found.

POLLOCK'S 'AUTOMATIC' PATENT PENDING - WISCONSIN STAMPED STEEL CO, - MADISON, WISC - - 9.25' all metal rack type quick adjust nut and pipe wrench. Good++ missing the pipe jaw attachment. (S707, patent not found) 0275. SCHWENDNER READING PA.

3, 1907 - DROPPED FORGED - 10 IN. - - 10' rack type quick adjust nut wrench.

Patent was issued to Max Schwendner of Reading, Penn. Good+ with tight jaw corner crack. RUMRUK - M.R.H. (may be previous owner's ID markings) - - 9' lever operated rack type quick adjust wrench. (not listed no info found) 0277.

EIFEL-GEARED PLIERENCH - MOD. 7' - 33 (1933 date code) PAT. - 1181654 - 1862817 - MADE IN USA BY AMER.

PLIERENCH CORP'N - CHICAGO, ILL, - FORGED - LOCKS THIS WAY - - 7.5' later Plierench with screwdriver on end of handle. Scarce smaller size. PAT SEP 7, 97 / 31 - - 8' wood handle version of the Vandegrift patent monkey wrench. Good++ with a tight handle crack. (S966, C313) 0279.

ROGERS PRINTZ & CO - WARREN, PA / DROP STEEL FORGED - - 8' wedge adjust nut wrench. Patented granted to John R. Long of Akron, Ohio on June9, 1908. (S549T) 0280. TRIMO 8' (on shaft) - TRIMO (on lower jaw) / TRIMONT MFG. CO - ROXBURY, MASS - - 8' size wood knife handled with the U-shaped type nut guard.

HENR _ _ _ SAL & CO (three lines of markings. Most are not readable) - - 12.5' stoutly made English screw adjust nut wrench with threaded center shaft. Minor dings and bruises. Looks like a wrench made by Palmer & Sons of Birmingham, England. British patent of April 16, 1861 No. 4354 applies. (see S378 and S447) 0282.

MORRIS-BLODGETT D. INDEP, MO / PAT JAN 18, 1911 FORGED TOOL STEEL - - 11.25' Pipe wrench. John Morris had left Kansas and lived in Marshalltown, Iowa when he patented this pipe wrench on Jan, 18, 1910 (not 1911 as marked on the wench) and evidently very few were made as they are seldom found. Good+ with a few areas with some pitting.

Unmarked - - 8' all metal quick adjust nut wrench with a spring loaded lower jaw and set screw. Identical to ones found marked 'Clutch (Or Lutch) Wrench Co / Waukesha, Wis. - Pat Jan 7, 02'. Also produced by Dent and Co. Patented by Frank W.

Dent -of Waukesha. FRAMINGHAM MASS / PAT'D JUNE 15, 97 (weak markings not all readable) - - 10' wood handled screw adjust nut wrench with a spring loaded lower jaw that provides a ratcheting action. Made by Whiting, Macomber & Whiting and patented by Chester Johnson of Boston, Mass.

(S639) (S639) 0285. BARNES TOOL CO, NEW HAVEN, CONN - PAT. - - 10.5' wooden handled pipe wrench with long adj sleeve and lever that pivots the lower jaw. Patent was issued Oct. 28, 1884 to Elbridge F.

And George A. Barnes of New Haven.

Good with minor dings and pitting, some weak markings, handle is cracked and has a groove carved around the circumference. HOE CORP.- POUGHKEEPSIE, NY / PATENTED FEB 21 - 1922 - 18 - - 19.5' all metal self adjust nut and pipe wrench with spring loaded jaws. Patented by Frederic Robert of Lynnbrook, Long Island, NY. Scarce large size in Excellent condition. Lot of three: (1.) POWER JAWS / TOYANG - - 10.25' rather modern quick adjusting pipe wrench with. Odd mechanism with pivoting adjusting jaws. Good++ with some damage to the jaw serrations, (not listed) (2.) POWER JAWS / TOYANG - - 12.75' same as above except longer.

Good++ with some damage to the jaw serrations, (not listed) (3.) TOP HWJ-300 CAP 1/8-1-1/4 IN / TOP DROP FORGED - - 12.5' modern quick adjust wrench. (not listed) 0288. STANDARD TOOL CO. - ATHOL, MASS USA - - 6' all metal screw and quick adjust nut wrench with a spring loaded bar that releases the lower jaw from the screw threads. Patented by Stephen Bellows of Athol, Mass on June 8, 1880.

Advertised as the 'Rapid Transit Wrench'. Also found marked 'Athol Machine Co. - Athol, MA'. Good+ with minor edge dings, stamped former owner's id ('LA'). (S526, C46) 0289. STOVER PIPE WRENCH - PAT PENDG.

/ CANTON, OHIO - U.S.A. STEEL FORGING - - 14' rack type quick adjust wrench. Rare wrench only second one we have had to sell. Schulz pictures one (S723) but without name or place of manufacture. (S723, C293) 0290.

Marked only H. CO - - 14.75' screw adjust alligator wrench usually found marked 'American Saw Co - Patented April 8, 1890'. Advertised as the 'Curtis Pipe Wrench' Patented by Andrew Curtis of Monroe, Maine.Good++, jaws spring is missing. (S33, S596) 0291. Lot of five: Unmarked shop made self adjust type wrenches. Will be sold choice wrench. Marked only with Pennsylvania Railroad's PRR in a keystone logo - - 15.5' all metal monkey wrench.

Crudely made with a reinforcing bar on back of the lower jaw, similar to but more primitive than the Perfect Handle wrenches. These were reportedly made in the Altoona shops of the Penn. (not listed) 0293. LAKE SUPERIOR WRENCH CO - SAULT STE MARIE, MICHIGAN - PAT. PEND.- - 12.5' self adjusting nut and pipe wrench. Patented 9-7-1909 by William Hilliard Munro of Sault Ste.

Marie, Ontario, Canada and 10-4-1910 by John Boulieu of Sault Ste. Good+, black paint. (S362) and 0294. HOE CORP.- POUGHKEEPSIE, NY / PATENTED FEB 21 - 1922 - 14 - - 15' all metal self adjust nut and pipe wrench with spring loaded jaws. Patented by Frederic Robert of Lynnbrook, Long Island, NY. 'VICTOR' TRADEMARK / BONNER'S PAT.

1902 - 1903 - - 15' quick adjust pipe wrench made by the Bonner Mfg. Of Chrisman, IL. And patented by Clarence E. Bonner, Cherrypoint, IL. Good++ with a few minor dings.

Lot of two: All metal Screw Adjust Pipe Wrenches (1.) 10' MADE BY THE LAWSON MFG. - CLEVELAND, OHIO / PAT DEC 4-20 - OTHER PAT PEND. (S609) (2.) Unmarked - - 9.5'. Similar to Lawson pipe wrench except has a replaceable lower jaw insert. May be an unmarked Franklin Wrench patented Jul. 20, 1886 by George Edwin Franklin of Natick, Mass. And produced by George E.

Franklin of Natick and Eaton, Cole, and Burnham Co. Of Bridgeport, Conn.

THE ROBERTS WRENCH CO. NY / PATENTED & PATENTS PENDING - - 13' self adjust wrench with spring loaded jaws. Same Feb 21, 1922 Frederick Robert patent as Hoe wrench applies. FISHER 12 / PAT. FEB, 8 1927 - 3 - - 11' all metal adjustable pipe wrench with threaded upper jaw shank and knurled sleeve and a pivoting lower jaw insert. Patented by James Fisher of Ceredo, West Virginia.

Zealously cleaned. Lot of two: (1.) WM. JOHNSON - Newark, NJ - - 10'.

Looks like the Buzzell Basin Wrench patented by George H. Buzzell of Boston, Mass. First one I've seen with the Johnson imprint. (see S89) (2.) TRIMO TRADEMARK BASIN WRENCH - PAT.

APPL'D FOR / ('D' in a shield logo) - - 10'. Lot of three: Vandegrift Patent Screw Adjust Nut Wrenches (1.) PAT SEPT 97 - 1- - - 8.25' all metal type. Severe pitting. (2.) PAT SEPT 97 (marked on upper jaw, other markings not readable) - 15 / 16 - - 6.75' all metal type. Unusual for a Vandegrift wrench to be marked on the jaw instead of the main body. (3.) PAT SEPT 97 / 30 - - 9' with wooden handle. Handle has a piece missing.

HECKMANN BLDG. CHICAGO, ILL. At first I thought this was a strap wrench missing the strap but after a quick internet search revealed it to be a 'Band Iron Tightener'. Excellent, like new. Clevises and Clevis Pin Wrenches (Lots 302 thru 323) 0302.

Marked only with a 'B' - - 8.5' clevis with single opening wrench. Some pitting. Unmarked - 9' large clevis and single opening wrench. Some minor pitting. Clevis marked 2885 (with Illinois Malleable Iron logo), wrench is marked '2' / (with an 'I' in a circle logo) - - 7.5' with a single open ended wrench. Clevis marked 2849, wrench 15 / (Illinois Malleable Iron logo) - - 6.5' with three opening wrench, Good++. No markings on clevis or wrench - - 6.25' with single open ended wrench.

Good+ with some minor pitting. Unmarked - - 10.25' clevis wrench pin with three openings attached to a wooden handle. Some pitting on pin shaft. Lot of two: (1.) 675 / (Eberhard's 'E' in a circle logo) - - 6' three opening clevis pin wrench. Some minor pitting. (2.) Unmarked - - 8.5' three opening clevis pin wrench. Lot of four: Single opening clevis wrench pins.

(1.) unmarked - - 6' with threaded end. Pitted (2.) U40 - - 4.5' odd type with threads under the wrench opening. (3.) Unmarked - - 5.5'. (4.) 21 - - 5.75' with threaded end. - CHICAGO, ILL / PAT OCT 22 - 94 - - 4.5' patented combination clevis and pin. Patent was granted to August Morganfield of Ogden, Kansas.

Good+, patent drawing shows a lever that is not on this clevis. Lot of two: (1.) Unmarked - - 7.5' clevis and single opening wrench pin.

Some pitting. (2.) Wrench and Clevis marked with Eberhard's 'E' in a circle logo - - 7' clevis and three opening wrench pin. Some pitting. Clevis marked 2875 - - 7.25' with single open ended wrench. Marked only '10' on clevis - - 6' clevis a single open ended wrench. PATD FEB 23, 21 / (Link Belt's dog-bone logo) - 8.5' clevis with alligator wrench pin, First one seen with an alligator instead of an open end wrench. (patent not found, Feb.

21,1921 is not a valid patent date) 0315. Lot of clevises and clevis parts. Lot of two: (1.) Clevis marked 81 - - 8' clevis with single opening wrench pin. (2.) 2938 - - 6' clevis only. Lot of two: (1.) H253 - - 11- clevis.

(2.) Clevis marked DC2 - - 6.5' clevis and single opening wrench pin, Rusty. Clevis is marked '16-1/2', wrench pin is marked '1' - - 8' clevis and single opening wrench pin. Some pitting. Clevis is marked 2884 - - 6.5' clevis and single opening wrench pin. Some pitting, wrench pin shaft is bent. Clevis is marked E509 - - 6' clevis and wrench pin with a square box and open end. Clevis marked 2834 - - 6' clevis with single open ended wrench pin.

Unmarked - - 6' clevis and three opening wrench pin. Clevis is marked 2337 - - 6' clevis and single opening wrench. International Harvester and Related Companies Wrenches (lots 324 thru 394) 0324. 95N (with IHC logo) - - 23' threshing machine tooth wrench and straightener.

(R1-252 and 254) 0325. M451D (IHC logo) - - 18.5' cylinder wrench and tooth straightener. (R1-254) 0326.

520959R1 (IHC) - - 22.5' hook latch for IHC 460 tractor. H272 (IHC, Aultman Miller Corn King Spreader, and Little Giant Fence Loom) - - 15'. Round hole with key and square box with three rectangular and three square openings on shaft. (R1-24) 0328. 922 (McCormick / IHC) - - 2.5' x 3.5' oil can holder. Some pitting, tight crack. 472605R1 (IHC) - - 15.5' gauge for cutter knife head non IHC 555 Forage Harvester.

Excellent with most of original red finish. B993 (IHC logo) - - 18' buggy whip holder. Purchased at the 2007 Vern Nail auction. A568X (IHC logo) - - 12.5' whip holder. 2883 (IHC) - - 7' clevis. No logo variant. The God Who Is There Schaeffer Ebooking.

(variant not listed) 0333. Q5027 (IHC logo) - - 8' chain detacher. Good with some hammer damage. 3274A - H - IHC Logo / CANADA - - 13' socket wrench with sliding handle. Handle is slightly bent.

(R1-251) 0335. 9259T (IHC) - - 8.75' double socket for IHC Mogul tractors circa1918. Good with several dings. (R1-252) 0336.

GA246 (IHC) - - 9.75' piston socket wrench. No IHC logo variant. Some pitting. (R1-253) 0337. Lot of two: (1.) 632L / (IHC logo) - - 6.75'. Some pitting, as found, not cleaned.

(2.) 632LA / (IHC logo) - - 4.5' socket with lip near socket opening variant. Top of socket has been distorted from hammering, rusty, not cleaned 0338. Lot of four: (1.) G246 (IHC) - - 8' piston socket for IHC Titan Tractors and early gas engines. (2.) 1228D-1-7/8 (ID by owner as IHC 19324D?) - - 1/2' drive 12-point socket. (3.) Unmarked 13095V (IHC) - - 4.25' steel sparkplug socket. (4.) Unmarked (IHC 136386H) - - 3' steel sparkplug socket 0339.

Lot of two: (1.) Only marked with IHC logo (IHC H758M or H758) - - 1/4' by 5.25' cold chisel with hex shaft. (R1-253) (2.) 1261-Y with IHC logo - - 5.25' flat steel water pump wrench. (R1-251) 0340. 2699TM (IHC) - - 4.75' very early heavy cast spark plug socket.

(R1-251) 0341. 204L / (IHC logo) - - 6' double square socket listed for McCormick-Deering Threshers, Huskers, Shredders. Markings indented variant. (R1-251)>0342. G6334 (IHC) - - 6' double ended piston socket.

Listed for IHC Titan and IHC early gas engines. (R1-253) 0343. F9136 - IHC logo - - 9.5' open end by square socket wrench.

Lot of two: (1.) VB624 - IHC logo) - - 10.75' binder crank and wrench. Numbers and logo markings raised variant. (2.) VB624 - IHC logo) - - 10.75' binder crank and wrench. Numbers and logo markings indented variant. 175 (IHC?) - - 7.25' with six different openings and 7/16' square stud.

(Listed in Gil Irps' list, not pictured in Rathbone) 0346. 9802DA (IHC logo) - - 8' crank, four prong variant.

9802D (IHC logo) - - 8' crank, two prong variant. Excellent with traces of original paint. 344S (IHC logo) - - IHC manure spreader apron crank. H872 / (IHC logo) - - 17' square socket crank for Deering binder. (R1-253) 0350.

B12189 (IHC) - - 16' square socket crank for Champion and McCormick -Deering Binders. F8121 - IHC logo - - 7' double square socket wrench, stud at 90° and number raised on shaft and logo indented on large socket end variant. F8121 - IHC logo - - 7' double square socket wrench, stud at 90° and all markings indented on large socket end variant.

SA1234 (IHC) - -7.5' by 9.75' tee handled square socket wrench with hammer head, no logo variant. (R1-255) 0354. 9534DA (with IH logo) - - 18' massive single open ended wrench. (R1-252) 0355. IHC logo J1507 - J1506 (IHC No. J1502) - - 13' ratchet, straight handled variant. (R1-254) 0356.

IHC logo J1507 - J1506 - - 16.25' ratchet, bent handled variant. (R1-254) 0357. 270N (IHC logo) - - 10.5' double hook spanner. Good++, not cleaned. (R1-250) 0358.

MILWAUKEE - - 15.25'. Large hub type wrench. No number variant. Good, not cleaned. (R1-328) 0359. 14327-L XT HARDNED - 1-1/16 / 207 I.H.C.

- WILLIAMS FORGED IN USA - - 17' spud wrench. (R1-252) 0360. 97L (with IHC logo) - - 5.5'. (R1-250) 0361. MCCORMICK E629J - - 14' face spanner wrench.

No IHC logo variant. (R1-319) 0362. 490B (IHC logo) - - 7.75' with five wrench openings and hammer head. (R1-251) 0363.

SA1406 / (IHC logo) - 12'. All markings indented. Good, painted. (R1-255) 0364. INTERNATIONAL 999498R1 (with IH logo) - U.S.A. - - 10.75' slotted head screwdriver.

INTERNATIONAL (with IH logo) - 3/4 - 13/16 / 999469R1 USA - 3/4 - 13/16 - - 9.25' double open ended plated wrench. INTERNATIONAL (with IH logo) - 5/8 / 5/8 999439R1 - U.S.A. - - 7.25' open end and box end plated combination wrench. IHC 1131057R1 (IH logo) - - 7.5' oil can spout. Excellent with original finish. NEWELL SANDERS PLOW CO (later IHC) / A120 - - 13'. Three square and one hex variant.

(R1-351) 0369. A1210 / (IHC logo) (Champion Mower & Reaper Co later IHC) - - 7.75' pitman wrench.

(R1-96) 0370. Lot of two: (1.) N738 - CANADA - with IHC logo - - 5.25' L-socket wrench, unlisted variant. (2.) N478 (with IHC logo) / H - - 5' tee socket wrench. Number raised, logo indented variant. (R1-254) 0371.

PAT SEPT 7 97 / INTERNATIONAL HARVESTER CO. - - 8.5' Vandegrift's patent all metal loop handled screw adjust nut wrench. D736 DEERING (in a ledger plate logo) - - 5.5' pitman wrench. Unmarked (IHC 196225C1) - - 8' cylinder gauge for IHC Combines 815 and 915. S110 - - 4.5' by 6.25' tee handled socket wrench.

(R1-255) 0375. 139 1/2E (IHC) - - 5' by 6.5' tee socket wrench for circa 1907 IHC auto buggies, trucks. Excellent with traces of original black finish.

(R1-250) 0376. 21080-V (IHC) - - 12.5' hub wrench. (R1-252) 0377.

22394VA (IHC logo) - - 8.5' hubcap wrench for early IHC trucks. (R1-252) 0378.

6849H SPARK PLUG (IHC) / D - - 8.5' double socket wrench. Good+, painted. (R1-252) 0379. 5378TM (IHC) - - 7' double socket wrench used on early IHC Titan Tractors and Two Cylinder Gas Engines. Good+, New red paint. (R1-252) 0380. PO11 (McKenzie Manufacturing Co.

Of La Crosse, Wisc., also in Irps' IHC wrench list) - - 8'. Two open ends variation. (see R2-193, variation not shown in Rathbone) 0381. M141 / (IHC logo) - - 9'. All markings indented. (R1-254) 0382.

149-1/4E (IHC) - - 5' by 6' tee handled spark plug socket wrench for circa 1907 IHC auto buggies, trucks. Side of socket has grind marks. (R1-250) 0383.

11858-DA (IHC logo) - - 5.5' flat steel hook spanner for Farmall tractor water pumps. PO209 (with IHC logo) - - 13.75'. Number and logo raised. (R1-254) 0385. P & O CO CANTON ILL / 3613 (later IHC) - - 12'. Good+ with some pitting.

(R1-370) 0386. Lot of two: P & O CO (Parlin & Orendorff Co.

- Canton, ILL. / IHC) Wrenches (1.) P & O CO CANTON ILL / 4129 (later IHC) - - 10.25'. (R1-370) (2.) P & O CO 4135 / CANTON ILL. (later IHC) - - 10.25'. (R1-370) 0387. CHATTANOOGA CP4003 / (IHC logo) - - 8.5' with hammer head. All markings raised.

Good+ with some mushrooming on hammer head. (R1-98) 0388. CHATTANOOGA 3 (later IHC) - - 9' with hammer head. Square hole variant. Bad casting on some markings. (R1-98) 0389. NEWELL SANDERS PLOW CO / A163 (later IHC) - - 8.5' with hammer head.

(R1-351) 0390. CP245 (Chattanooga Plow Co., IHC & Oliver) - - 9.25'. (R360, R98) 0391. Lot of six: P & O CO (Parlin & Orendorff Co. - Canton, ILL. / IHC) Flat Steel Wrenches. Including three 11.75' long with different direction and orientation markings.

Lot of two: (1.) P & O CO. / 5283 - - 10' Emerson type. (R1-370) (2.) 295 (P & O / IHC) - - 9'.

Five open ends, offset on small end variation. Pitting under black paint, small drilled hang hole. Lot of two: (1.) P890 - IHC logo / E (IHC, earlier Osborne) - - 7.25'. P890 and IHC logo both raised. Some pitting. (R!-254) (2.) P & O CO - 4130 / CANTON ILL (Parlin & Orendorff Co.

- Canton, ILL. / IHC) - - 9'. (R1-370) 0394. C (Keystone Co, Sterling, Illinois, later IHC) - - 7.5'. (R1-280) Farm Related Wrenches - Second Group (lots 395 thru 410) 0395. CASE PLOW WORKS / C (originally a Massey-Harris wrench) - - 14.75'. (R1-77) 0396.

Lot of two: (1.) NO 10G (Grand Detour Plow Co.) - - 10'. Three open end variation. There are at least seven variations of the No. 10 Grand Detour Plow wrench. Pitting mostly on the back side. (see R1-205, this variation not shown) (2.) 13 (Grand Detour Plow Co., Dixon, Illinois) - - 7.5'. Loop handle with hammer head, no open end on end of handle variant.

Pitted (R3-94)) 0397. 5378 A - DEANE / OF HOLYOKE (Holyoke, Mass.) - - 9.5'.

Good++, not cleaned. (R1-129) 0398. G99 (David Bradley) - - 8.5'. (R1-126) 0399. Lot of two: (1.) Shares / N167 (Janesville Machine Co.) - - 5.5'.

(R1-265) (2.) B573 (American Seeding Machine Co, originally Superior Drill Co. - Springfield, Ohio) - - 8.5'. (R1-446, R1-16) 0400.

Lot of three: (1.) 179 (orphan) - - 7' pitman wrench. (not listed) (2.) ROPER - ARMSTRONG (with arm & hammer logo) SPECIAL - 9/16 - - 7.75' odd double offset stamped steel wrench. (not listed, no info found) (3.) R-11 (orphan) - -5.25' neat little three opening wrench with peg on end. (not listed, no info found) 0401. S & T / S & T - - 4.75' fancy malleable wrench with five openings and small hammer head. (R1-409, no info) 0402. TEDDER / LOADER (orphan) - - 8'.

First one I have seen with the LOADER imprint. TEDDER (orphan) - - 8'. (R1-453) 0404. SIMMONS / UTILITY(Simmons Hardware Co St. Louis) - - 7' Deering Style, black paint, minor pitting. (R1-426) 0405. / H4 - - 8' with double hammer polls.

(R1-380) 0406. FULLER & JOHNSON / 2P30 - - 9'. One square box openings variant. (R1-191) 0407. F163 (Oliver) - - 7'.Good++. (R1-360) 0408.

Unmarked (Campbell Corn Drill Company - Harrison, Ohio) - - 5.5'. Identified from a Campbell Parts Lists for their No. 3 one horse drills. Excellent (R3-41). 41 (orphan) - - 8.25'. (not listed) 0410.

Lot of three: (1.) 103 HAWORTH'S / 103 CHECK ROWER - - 7.5'. Claw on end variant. (R1-227) (2.) M555 / MADE IN U.S.A. (Massey-Harris) - - 5.5' pitman wrench. (R1-312) (3.) B. AVERY & SONS / CHILLED PLOW - K209 (Louisville, KY) - - 9.5'. Good+ with some pitting.

(R1-27) Silo and Silo Type Wrenches (lots 411 thru 422) 0411. UNADILLA SILO CO - 30 - - 10'. Open end by double box end. (R1-462) 0412. WOODS BROS SILO & MFG CO / THE HINGE DOOR SILO - - 8.5'. Extended side variant. Good+ with some light pitting.

(R1-496) 0413. WOODS BROS SILO & MFG CO / THE HINGE DOOR SILO - - 8.5'. Flat side variant.

(R1-496) 0414.